Carbon steel pipe specifications
Material: ASTM A106 Size: NPS 1/2″- 24″ Wall thickness: Schedules 10 to SCH 160, STD, XS and XXS. Carbon steel ASTM A106 seamless pressure pipe (also known as ASME SA106 pipe) is usually used to build oiland gas refineries, power plants, petrochemical plant, the boiler and vessel, pipeline there must be a higher temperature of the liquid and gas. And stress levels.
Beijing Metleader Pipeline stocks a full range of A106 pipe (SA106 Pipe) in: Grades B and C I/2 inch to 30 inch diameter SCH 10 to 160, STD, XS and XXS SCH 20 to XXS
The ASTM A106 seamless pressure pipe (also known as ASME SA106 pipeline) covers a seamless carbon steel nominal wall pipe for high temperature service. Suitable for bending, curling and similar shaping operations.
NPS 1-1/2 "below, may be hot finished or cold drawn. Unless otherwise specified, NPS 2 "and the above materials shall be heat treated.
Kill steel, the primary melting process is an open hearth, basic oxygen or electric furnace, which may becombined with separate degassing or refining. Casting or casting billet cast steel is permitted. Thermal-finished tubes do not need heat treatment. The cold drawn tube shall be heat treated after the final cooling.
Special instructions to the customer: due to the changes in A106 and SA106, please indicate whether you need SA106 in your purchase order. Please refer to the chemical changes allowed on the S/A106 specification sheet. Please note that ASTM International, formerly known as the American testing and materials association (ASTM), has not agreed on the specification for the BME seamless pressure pipeline. Now the ASTM A106 B and ASME SA 106 B are different in size.