Butt weld stainless steel reducing tee
The production processing of pipe tee commonly used including cold-extruded and hot pressing. All pipe tees must be accepted heat treatment to eliminate stress no matter what material. Otherwise the tee is very easy to be cracked. And the heat treatment normally involves normalizing and tempering, only to do normalizing the machanical capacity can not met standard request. Except that all tees should be done magnetic powder inspection to check if there are hidden cracks. If the hidden cracks can’t be found which will bring big risk and damage for the pipeline. Metleader has exported and supplied many customers stainless steel tee with big quantity. Our products never happen quality issue of crack. Because our production of tee correctly and strictly according to the standard request. We always insist our aim to provide stable quality and good service. It is our basic rule.
The stability of product quality comes from strict inspection. Especially steel pipe tee if there is no strict inspection, there will be great potential risks. Because the production technology of tee is the branch produced by cold extrusion or hot pressing, inside of the branch is easy to occur internal crack, which is hard to be found by eyes. It is necessary to test the crack through special method The testing method to is usually magnetic powder detection, the crack can be easily detected by this method. Our all pipe tees are required to do magnetic particle testing to ensure good quality.
Specification of butt weld stainless steel reducing tee:
Product name: butt weld stainless steel reducing tee
Size: 1/2" to 48"
Wall thickness: SCH5 to XXS.
Standard: ASME/ANSI B16.9, B16.28, MSS SP-43, JIS B2311/2312, DIN, an d GOST.
Material: 304/304L, 316/316L etc.
Application range: petroleum, oil an gas pipeline, chemical processing, power plant, shipbuilding etc.
Package: plywood pallet, plywood case, carton (1/2" to 3") or as per customers'request.
Delivery: 30days for general orders.